用户名: 密码:    忘记密码   注册   在线充值
评定石油燃料燃烧总热值和净热值的试验方法  
 【英文标准名称】  Estimation of Net and Gross Heat of Combustion of Petroleum Fuels, Test Method for (05.03)
 【原文标准名称】  评定石油燃料燃烧总热值和净热值的试验方法
 【标准号】  ANSI/ASTM D4868-1990
 【标准状态】  废止
 【国别】  美国
 【发布日期】  1990
 【实施或试行日期】  
 【发布单位】  美国国家标准学会(US-ANSI)
 【起草单位】  ANSI
 【标准类型】  ()
 【标准水平】  ()
 【中文主题词】  矿物油;机动车燃料;试验;热值
 【英文主题词】  Automotive fuels;Calorific value;Calorific values;Mineral oils;Testing
 【摘要】  This test method covers the estimation of the gross and net heat of combustion in SI units, megajoules per kilogram, of petroleum fuels from the fuel density, sulfur, water, and ash content. Note 1 -The equation for estimation of net and gross heat of combustion used in this method were originally published by the NIST Publication No. 97. This test method is especially useful for estimating, using a minimum number of tests, the heat of combustion of burner and diesel fuels for which it is not usually critical to obtain very precise heat determinations. Note 2 - More accurate estimation methods are available for aviation fuels (Test Methods D 1405 and D 3338, and D 4529). However, those estimation methods require additional tests to those required in this test method. This test method is purely empirical (NOTE 1). It is applicable only to liquid hydrocarbon fuels derived by normal refining processes from conventional crude oil that conform to the requirements of specifications for petroleum fuels as described in Note 3. This test method is valid for those fuels in the density range from 750 to 1000 kg/m<(hoch)3> and those that do not contain an unusually high aromatic content. High aromatic content fuels will not normally meet fuel specification criteria. Note 3 -The estimation of the heat of combustion of a hydrocarbon fuel from its density and sulfur, water, and ash content is justifiable only when the fuel belongs to well-defined classes for which a relationship between these quantities have been derived from accurate experimental measurements on representative samples of these classes. Even in these classes, the possibility that the estimate may be in error by large amounts for individual fuels should be recognized. This test method has been tested for a limited number of fuels from oil sand bitumen and shale oil origin and has been found to be valid. The classes of fuels used to establish the correlation presented in this test method are represented by the following applications: This test method is not applicable to pure hydrocarbons. It is not intended as a substitute for experimental measurements of heat of combustion (Note 04). Note 4 -The procedures for the experimental determination of the gross and net heats of combustion are described in Test Methods D 240 and D 4809. The values stated in acceptable SI units are to be regarded as the standard. This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.
 【中国标准分类号】  E31
 【国际标准分类号】  75_160_20
 【页数】  
 【正文语种】  英语
索取全文
标准全文由山东省标准化研究院向您提供(不能使用知网账号下载全文),需向山东省标准化研究院支付相关费用后,方可获得标准。

 

       

标准间关联  
本领域专利与科技成果  
本标准研制背景
本标准应用动态
所涉核心技术研究动态
京ICP证040431号 互联网出版许可证 新出网证(京)字008号 京公网安备11010802014875号
© 2014中国知网(CNKI) 《中国学术期刊(光盘版)》电子杂志社有限公司
服务热线:400-810-9888 订卡热线:800-810-6613
在线咨询:http://help.cnki.net 客服中心:http://service.cnki.net 电子邮件:help@cnki.net