用户名: 密码:    忘记密码   注册   在线充值
涂料和相关制品使用前钢衬底的制备.表面制备方法.第2部分:磨料喷砂清理  
 【英文标准名称】  Preparation of steel substrates before application of paints and related products - Surface preparation methods - Part 2: Abrasive blast cleaning
 【原文标准名称】  涂料和相关制品使用前钢衬底的制备.表面制备方法.第2部分:磨料喷砂清理
 【标准号】  BS EN ISO 8504-2-2001
 【标准状态】  
 【国别】  英国
 【发布日期】  2000-08-15
 【实施或试行日期】  2000-08-15
 【发布单位】  英国标准学会(GB-BSI)
 【起草单位】  BSI
 【标准类型】  ()
 【标准水平】  ()
 【中文主题词】  研磨剂;应用;喷砂清理;爆破;喷砂处理技术;清洁处理;清洁器;涂层材料;涂层;颜色;建筑;腐蚀;防腐;定义;定义(术语);除锈;评估;精整;手动工具;机床;金属涂层;涂料;准备;制备等级;表面预处理;防护覆层;规范(验收);钢产品;钢;钢结构作业;衬底(绝缘);表面光洁度;表面准备;表面处理;表面;测试;工具;清漆
 【英文主题词】  Abrasives;Application;Blast-cleaning;Blasting;Blasting technique;Cleaning;Cleanings;Coating materials;Coatings;Colour;Construction;Corrosion;Corrosion protection;Definition;Definitions;Derusting;Evaluations;Finishes;Hand tools;Machine tools;Metal coatings;Paints;Preparation;Preparation grade;Pre-treatment of surfaces;Protective coatings;Specification (approval);Steel products;Steels;Structural steel work;Substrates (insulating);Surface finishes;Surface preparation;Surface treatment;Surfaces;Testing;Tools;Varnishes
 【摘要】  This part of ISO 8504 describes abrasive blast-cleaning methods for the preparation of steel surfaces before coating with paints and related products. It also contains information on the effectiveness of the individual methods and their fields of application. ISO 8504 is applicable to new and corroded steel surfaces and to steel surfaces that are uncoated or have been previously coated with paints and related products. For limitations, see note 2. NOTE 1 These methods are essentially intended for hot-rolled steel to remove mill scale, rust, etc., but could also be used for cold-rolled steel of sufficient thickness to withstand the deformation caused by the impact of abrasive. NOTE 2 There are several items that should be included in the purchaser's procurement documents to supplement this part of ISO 8504. Items that should be considered as a part of surface preparation before coating are edge grinding, removal of grease and oil, porosity of welds, removal of weld spatter, removal of burrs and other sharp edges, grinding of welds, filling of pits and other surface imperfections that may cause premature failure of the coating system (see ISO 8501-3 for more information) and the removal of water-soluble contaminants.
 【中国标准分类号】  A29
 【国际标准分类号】  25_220_10
 【页数】  13P.;A4
 【正文语种】  英语
索取全文
标准全文由山东省标准化研究院向您提供(不能使用知网账号下载全文),需向山东省标准化研究院支付相关费用后,方可获得标准。

 

       

标准间关联  
本领域专利与科技成果  
本标准研制背景
本标准应用动态
所涉核心技术研究动态
京ICP证040431号 互联网出版许可证 新出网证(京)字008号 京公网安备11010802014875号
© 2014中国知网(CNKI) 《中国学术期刊(光盘版)》电子杂志社有限公司
服务热线:400-810-9888 订卡热线:800-810-6613
在线咨询:http://help.cnki.net 客服中心:http://service.cnki.net 电子邮件:help@cnki.net