用户名: 密码:    忘记密码   注册   在线充值
电气用热收缩管的标准试验方法  
 【英文标准名称】  Standard Test Methods for Heat-Shrinkable Tubing for Electrical Use
 【原文标准名称】  电气用热收缩管的标准试验方法
 【标准号】  ASTM D2671-2000(2007)e1
 【标准状态】  Active
 【国别】  
 【发布日期】  2000
 【实施或试行日期】  
 【发布单位】  美国材料与试验协会(US-ASTM)
 【起草单位】  D09.07
 【标准类型】  (Test Method)
 【标准水平】  ()
 【中文主题词】  收缩;试验;电绝缘;管;覆层;热缩元件;电气工程
 【英文主题词】  adhesive peel strength; brittleness temperature; color; color stability; copper corrosion; dielectric breakdown voltage; dielectric strength; flame resistance; fluid resistance; fungus resistance; heat resistance; heat shock; heat shrinkable tubing; inside diameter; length; low temperature; melting point; restricted shrinkage; secant modulus; specific gravity; storage life; stress modulus; temperature index; tensile strength; test methods; thermal endurance; thermal endurance graph; tubing; heat-shrinkable; ultimate elongation; volume resistivity; wall concentricity; wall thickness; water absorption
 【摘要】  

These test methods include most of the important tests used to characterize heat-shrinkable tubing. They are intended primarily for, but not limited to, extruded heat-shrinkable tubing.

Variations in these test methods or alternate contemporary methods of measurement may be used to determine the values for the properties in this standard provided such methods ensure quality levels and measurement accuracy equal to or better than those prescribed herein. It is the responsibility of the organizations using alternate test methods to be able to demonstrate this condition. In cases of dispute, the methods specified herein shall be used.

Note 28212;Provision for alternate methods is necessary because of (1) the desire to simplify procedures for specific applications without altering the result, and (2) the desire to eliminate redundant testing and use data generated during manufacturing process control, including that generated under Statistical Process Control (SPC) conditions, using equipment and methods other than those specified herein. An example would be the use of laser micrometers or optical comparators to measure dimensions.

1.1 These test methods cover the testing of heat-shrinkable tubing used for electrical insulation. Materials used include poly(vinyl chloride), polyolefins, fluorocarbon polymers, silicone rubber, and other plastic or elastomeric compounds.

1.2 The values stated in inch-pound units are the standard except for temperature, which shall be expressed in degrees Celsius. Values stated in parentheses are for information only.

1.3 The procedures appear in the following sections:

1.4 This is a fire-test-response standard.

This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use. For specific hazard statements, see Sections and .

Note 1

These test methods are similar, but not identical to, those in IEC 60684-2 (see also Note 0).

1.5 This is a fire-test-response standard. The test procedures measure the resistance of the tubing to ignition and propagation of flame after ignition under prescribed conditions of test.

1.6 This standard is used to measure and describe the response of materials, products, or assemblies to heat and flame under controlled conditions, but does not by itself incorporate all factors required for fire hazard or fire risk assessment of the materials, products, or assemblies under actual fire conditions.

 【中国标准分类号】  G33
 【国际标准分类号】  29_120_99
 【页数】  18P.;A4
 【正文语种】  
索取全文
标准全文由山东省标准化研究院向您提供(不能使用知网账号下载全文),需向山东省标准化研究院支付相关费用后,方可获得标准。

 

       

标准间关联  
本领域专利与科技成果  
本标准研制背景
本标准应用动态
所涉核心技术研究动态
京ICP证040431号 互联网出版许可证 新出网证(京)字008号 京公网安备11010802014875号
© 2014中国知网(CNKI) 《中国学术期刊(光盘版)》电子杂志社有限公司
服务热线:400-810-9888 订卡热线:800-810-6613
在线咨询:http://help.cnki.net 客服中心:http://service.cnki.net 电子邮件:help@cnki.net