用户名: 密码:    忘记密码   注册   在线充值
胶粘膜支持或阻止霉菌生长能力的标准试验方法  
 【英文标准名称】  Standard Test Methods for Ability of Adhesive Films to Support or Resist the Growth of Fungi
 【原文标准名称】  胶粘膜支持或阻止霉菌生长能力的标准试验方法
 【标准号】  ASTM D4300-2001(2008)
 【标准状态】  Active
 【国别】  美国
 【发布日期】  2001
 【实施或试行日期】  
 【发布单位】  美国材料与试验协会(US-ASTM)
 【起草单位】  D14.30
 【标准类型】  (Test Method)
 【标准水平】  ()
 【中文主题词】  
 【英文主题词】  adhesive film; biodegradation; biological testing; fungi; Contamination--adhesives; Fungal influence/resistance--adhesives; Biodegradation; Biological data analysis; Dry adhesives; Microbiological examination; Mineral salts agar (MSA); Nuclear reactor ves
 【摘要】  

These test methods are designed to be used to determine the susceptibility of the adhesive film to biodegradation and whether the adhesive will carry into the bond line sufficient anti-fungal properties to prevent growth of fungi frequently present on the gluing equipment, on adherends, or in the adhesive as applied.

Potato dextrose agar (PDA) provides a complete medium for the growth of fungi, while mineral salts agar (MSA) lacks a carbohydrate source and provides a less favorable medium. Use of PDA tests the adhesive film for its ability to resist the growth of fungi on its surface as well as its ability to repel a copious growth of fungi on the adjacent agar surface. Use of MSA tests the adhesive film primarily for its ability to resist the growth of fungi on its surface. When it is used, there is a reduced possibility that the growth from the agar will be mis-read as coming from the adhesive film, since fungal growth on the adjacent agar will be scant.

Note 28212;The method given here using the MSA is based on Practice G 21, adapted to be used with adhesives. Requirements to meet the approval of government specifications are the use of the MSA described in 10.2, and a mixed species of fungi described in 8.2 for the inoculum.

The results obtained when using the procedures given in this method apply only to the species used for the testing. The test species listed in Section 8 are frequently used by laboratories to test for antifungal properties, but they are not the only ones which could be used. Selection of the fungal species to test against requires informed judgment by the testing laboratory or by the party requesting the tests. These methods are especially useful when species that have been isolated from contaminated adhesives are used as the test species (see Section 8) to aid in the selection of more effective fungicides.

The efficacy of some biocides may change in storage due to the chemical and thermal environment to which they are subjected as components of certain adhesives. These test methods are not appropriate for determining the effect of fungal contamination on adhesives under water-soaking conditions, because they are not designed to cover the possibility of water-soluble biocides leaching out of the bond line.

These test methods are dependent upon the physiological action of living microorganisms under a reported set of conditions. Conclusions about the resistance of the test adhesive to fungal attack can be drawn by comparing the results to simultaneously run controls of known resistance. See X5.2 for statements regarding test repeatability.

1.1 These test methods test the ability of adhesive films to inhibit or support the growth of selected fungal species growing on agar plates by providing means of testing the films on two agar substrates, one which promotes microbial growth, and one which does not.

1.2 These test methods are not appropriate for all adhesives. The activity of certain biocides may not be demonstrated by these test methods as a result of irreversible reaction with some of the medium constituents.

Note 18212;As an example, quaternary ammonium compounds are inactivated by agar.

1.3 A test method is included for use with low-viscosity adhesives along with an alternative method for use with mastic-type adhesives. Also, a method approved by the government is given.

1.4 The values stated in SI units are to be regarded as the standard. The values given in parentheses are for information only.

1.5 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user o......

 【中国标准分类号】  G38
 【国际标准分类号】  83_180
 【页数】  9P.;A4
 【正文语种】  英语
索取全文
标准全文由山东省标准化研究院向您提供(不能使用知网账号下载全文),需向山东省标准化研究院支付相关费用后,方可获得标准。

 

       

标准间关联  
本领域专利与科技成果  
本标准研制背景
本标准应用动态
所涉核心技术研究动态
京ICP证040431号 互联网出版许可证 新出网证(京)字008号 京公网安备11010802014875号
© 2014中国知网(CNKI) 《中国学术期刊(光盘版)》电子杂志社有限公司
服务热线:400-810-9888 订卡热线:800-810-6613
在线咨询:http://help.cnki.net 客服中心:http://service.cnki.net 电子邮件:help@cnki.net